Xerox DocuColor 250 Online Help Manual page 80

- 62
3. Click the [Advanced Settings...] button. The Advanced
Settings window displays.
4. If you wish to use the RGB Color Space, select the pull-down
menu under that heading for Image. Choose from the
following:
• Adobe RGB
• sRGB
• Xerox Consistent Color Mode RGB
• Xerox Consistent Color Mode RGB, Gamma = 1
You may also set the Text and Graphics Profile differently than
the Images Profile. Within the pull-down are the same options
as listed above.
5. If you wish to use the CMYK Color Space, select the pull-down
menu under that heading for Image. Choose from the
following:
• Commercial CMYK
• DocuColor 2000 CMYK
• DocuColor 6000 CMYK
• DocuColor 8000 CMYK
• FOGRA Gloss Coated CMYK
• FOGRA Matte Coated CMYK
• FOGRA Uncoated CMYK
• SWOP Coated CMYK
• SWOP Plus CMYK
NOTE: You may see different options under this pull-down
menu, depending upon which printer you have.
You may also set the Text and Graphics Profile differently than
the Images Profile. Within the pull-down are the same options
as listed above.
6. If you wish to use the Gray Color Space, select the pull-down
menu under that heading for Image. Choose from the
following:
• DC2000 GRAY
You may also set the Text and Graphics Profile differently than
the Images Profile. Within the pull-down are the same options
as listed above.
7. Select [OK] to save settings and exit the job properties tabset,
or [Apply] to save settings and continue setting job properties,
or [Cancel] to exit the tabset without saving your edited
settings.
P r o du c t N am e B o ok N am e