Xerox DocuColor 250 Online Help Manual page 47

P r od u c t Na me Bo o k N am e
capabilities of your printer and any attached finishing units. If no
finishing unit is available, the default setting is None.
To use the Stapling/Finishing FAB:
1. From the Stapling/Finishing pull-down menu select an option.
Move the cursor over the paper mimic icons to see a
description of each available selection and click the icon you
want to use.
NOTE: If a staple-related finishing option is available, the
Staple Placement option becomes active. Use the Stitch
Placement option to modify the location of the stitches on the
finished set.
2. If your printer supports staple placement and if stapling is
selected, you can select a staple placement position.
a. Select [Staple Placement...]. The Staple Placement dialog
window opens.
b. The selected stock displays in the Stock Size field. You can
select from [inches] or [mm].
c. Use the slide bar to set staple placement.
d. Click [OK] once you have set the staple placement.
3. Select an Output Location where you want your print job to be
delivered. Available selections depend on your printer
configuration.
• System Specified: This is the default selection. The
system determines the most appropriate destination of the
given job.
• Top Tray: Used for simpler jobs that do not require
finishing or collated stacking. This tray is also used as the
purge destination.
• Main Tray or Stacker: Used for most jobs that require
stacking or stapling.
• Bypass Transport: Jobs are passed through to any
installed third-party finishing device.
NOTE: If you select a finishing option that conflicts with the
Output Location selection, the Output Location
automatically changes to a selection that can handle your
finishing choice.
NOTE: Offset options are only available if the Output
Location selection can handle offset delivery.
4. Output order determines the order in which the printed pages
are delivered to an output device, either first to last or last to
first. Specifying the output order is important for certain types
of finishing. Select from the following:
• System Specified: Allows the system to determine the
most appropriate order for the given job.
-29