Xerox DocuColor 250 Online Help Manual page 42

- 24
• PDL Specified
4. If desired, select Substitute Images in the OPI field.
5. Select [OK].
ASCII fonts
If the job that you are printing is an ASCII job, you must select the
font used to print this job before printing can occur. The font name,
orientation, and size must be selected.
To choose ASCII fonts:
1. In the Fonts list, select the name of the font to be used when
printing the ASCII job. If no font is selected, the default font,
Courier, is used.
2. Select the image orientation from the Font Orientation menu. If
no choice is made, the job is printed as portrait.
3. Enter a font size by typing a value or using the spin box. The
range of available font sizes are displayed below the spin box.
4. Select [OK].
Using Network Filing
NOTE: SMB/FTP must be enabled on the system by the System
Administrator before it can be accessed to save jobs. See Setting
up SMB/FTP for additional information.
Network Filing via SMB: The System Administrator can program
the SMB Server Login information that is required to gain network
file access. If this information was not programmed by the System
Administrator, perform the following:
1. If required, enter your User Name and Password.
2. Type the Domain Name or Select [Browse] to locate the
Domain Name and then select [OK].
3. Type the Server Name or Select [Browse] to locate the Server
Name and then select [OK].
4. If required, type the Share Path or Select [Browse] to locate
the Share Path and then select [OK].
5. After entering all the required information, select [OK] to close
the Save Location dialog window. The Network Validation
dialog opens if it takes longer than two seconds to validate the
network connection information. Select [OK] if validation is
successful. If validation is not successful, follow the displayed
instructions or contact the System Administrator.
Network Filing via FTP or SFTP: The System Administrator can
program the FTP and SFTP Server Login information that is
required to gain network file access. If this information was not
programmed by the System Administrator, perform the following:
P r o du c t N am e B o ok N am e