Xerox DocuColor 250 Online Help Manual page 135

P r od u c t Na me Bo o k N am e
• Xerox Custom Color
• Custom
NOTE: If Custom Color is selected, the control for Print As
Grayscale becomes available. See Print as Grayscale for
more information.
5. Select the Options FAB. Within the Options FAB are controls
for Black Overprint, Anti-Aliasing, and Trapping. See Image
Quality Options FAB for more information.
6. Select the Image Adjustments FAB. Within the Image
Adjustments FAB are controls for:
• Lightness
• Contrast
• Saturation
• Color Cast
See Setting Image Adjustment options for more information.
7. Select the User TRCs FAB. Within this FAB you may select
user TRCs that have been set up within Color Manager. See
User TRCs for more information.
8. Select the Halftone FAB. Within the Halftone FAB are controls
for:
a. Halftone pull-down menu: options include:
– System Specified
– 150 Dot
– 200 Line
– 300 Line
– 600 Line
– Stochastic
NOTE: Your halftone options may be slightly different,
depending upon which printer you have.
b. Edge Enhancement: Options include:
– Enabled
– Disabled
See Halftone Screen for more information.
9. Select the Image Resample FAB. Within this FAB are the
following selectable Image Resample, or Interpolation,
methods:
• System Specified
• Nearest Neighbor
• Bi-Linear
• Smart
See Setting Image Resample, or Interpolation, options for
-29