Xerox DocuColor 250 Online Help Manual page 225

Using the Setup menu
Di g i tal Co l or P r o du c ti o n S y s te m - 1
The Setup Menu
Most system configuration functions can be accessed through the
DocuSP Setup menu. System configuration activities include setting
up the network gateways, specifying system preferences, viewing the
system and software configurations, and feature licenses. The
available options depend on your system configuration.
The Setup menu allows you to perform the following tasks:
• System Configuration: The System Configuration utility allows you
to perform peripheral management tasks, displays information for
the printer, controller, network and attached devices, displays the
list of software packages currently loaded on the DocuSP
controller, and provides the ability to back up and restore the
software files.
– Accessing and viewing the system configuration
• Open PrePress Interface
• Feature Licenses: The License Manager window displays a
selection of features such as Diagnostics, Decomposers and
Gateways.
• Networking: The System Administrator can configure the printer on
a network.
• Setting up Networking for your printer: This feature is used to
configure your network environment and the gateways that were
loaded and licensed when the DocuSP software was installed.
– TCP/IP
• Setting up TCP/IP
• Setting up LPD
• Setting up ADS
• Setting up Ethernet connections
• Entering Proxy Information Into Remote Services
• Enabling HTTP
– Enabling Raw TCP/IP (Port 9100)
– Configuring SNMP