Xerox DocuColor 250 Online Help Manual page 318

- 18
menu. Select [Unspecified] from the Name menu to set
custom stock properties. Make selections from the
Size/Color FAB, Type/Weight FAB, and if available,
Coating FAB.
– You can select a stock and verify the characteristics of
the stock by selecting [Stock List...], selecting a stock,
and clicking [OK].
– Make stock selections directly from the Size/Color
FAB, Type/Weight FAB, and if available, Coating FAB.
7. Click [OK] to apply your changes and exit the dialog window.
NOTE: Ensure that the attributes you select are supported on
the printing system.
How do I select offset stacking?
1. Open Job Manager.
2. Double-click a job in the Active or Inactive Jobs list. You can
access Completed jobs if Retain PDL Files is enabled. For
additional information about Retain PDL Files see Setting the
Job Policy.
3. Select the Output tab.
4. Choose the Stapling/Finishing FAB to set stapling, finishing,
offset, and output location options. See Using the Stapling/
Finishing FAB for more information.
5. Select an offset from the Offset pull-down menu:
• None: Offset is not performed. This is the default selection.
• Each Collated Set: The offset occurs between each set
printed.
• Each Uncollated Stack: The offset occurs between each
stack printed.
• Each Set and Stack: The offset occurs between each set
and stack printed.
NOTE: Offset options are available only if the Output
Location selection can handle offset stacking.
6. Offset Subset inserts an offset within a stack (uncollated set)
after each specified page number. Select [Offset Subset] and
set the Pages Per Subset value.
How do I add and program covers?
To add and program covers:
1. Open Job Manager.
2. Double-click a job in the Active or Inactive Jobs list. You can
access Completed jobs if Retain PDL Files is enabled. For
additional information about Retain PDL Files see Setting the
Job Policy.
P r o du c t N am e B o ok N am e