Xerox DocuColor 250 Online Help Manual page 173

P r od u c t Na me Bo o k N am e
To copy a stock entry:
1. Open the Printer Manager.
2. Choose the Stock Library tab.
3. Right-click a stock entry and choose [Copy...] from the menu.
The Copy dialog opens.
4. Type a new stock name and modify any desired attributes.
5. Select [OK]. The new entry is displayed in the stock list.
Deleting a stock entry
To delete a stock entry:
1. Open the Printer Manager.
2. Choose the Stock Library tab.
3. Right-click a stock entry and choose [Delete] from the menu.
4. Select [Yes] to confirm the deletion. The stock is deleted from
the list.
NOTE: You cannot delete stocks pre-programmed into the
system.
Assigning a stock to a paper tray
When you load a new paper stock into the printer or when you
want to use a stock with a particular paper tray, you need to
program that change within the controller.
To assign a stock to a paper tray:
1. Open the Printer Manager.
2. Choose the Stock Library tab.
3. Right-click a stock entry and choose [Add to Trays...].
4. Select the trays that you want to assign the stock type.
5. Selecting [Override] applies this setting to any jobs submitted
and will take precedence over any property selections made in
the Job Manager or programmed into the job.
6. Click [OK] to close the dialog. The entries appear in the Tray
column of the stock list.
Removing a stock from assigned trays
When a particular stock is removed from a tray, you need to
remove the stock assignment from the tray in the Printer Manager.
To remove a stock from assigned trays:
1. Open the Printer Manager.
2. Choose the Stock Library tab.
3. Right-click a stock entry and choose [Remove from Trays].
-13