Xerox DocuColor 250 Online Help Manual page 141

P r od u c t Na me Bo o k N am e
3. Select the Image Quality Tab.
4. Select the Image Resample FAB.
5. Select the radio button next to the Interpolation method you
want to employ.
• System Specified: Use this method if you are unsure of
which other method to choose.
• Nearest Neighbor Interpolation: A method used to scale
image data (pixels) from one resolution to another. The
output pixel value is simply the value of the input pixel
closest to the output location. Nearest neighbor
interpolation is the highest speed interpolation on DocuSP.
• Bi-Linear Interpolation: A method used to scale image
data (pixels) from one resolution to another. The
replacement pixel in the scaled image is calculated using a
weighted sum of the four nearest pixel values in the source
image. This method offers higher quality than Nearest
Neighbor Interpolation.
• Smart Interpolation: A method used to scale image data
(pixels) from one resolution to another. This interpolation
method automatically chooses between bi-linear
interpolation and filtered interpolation based on the input
image characteristics. Smart interpolation is the highest
quality interpolation available on DocuSP.
6. If desired, select the override checkbox for this feature.
7. Select [OK] to save changes and exit the Queue Properties
tabset, or select [Apply] to save current changes and continue
making queue settings.
Editing Color Advanced Settings
Selecting the Input Color Space
To setup the Input Color, complete the following steps:
1. Double-click a queue in the Queues list. The Queue Properties
window appears.
2. Select the Image Quality tab.
3. Click the [Advanced Settings...] button. The Advanced
Settings window displays.
4. If you wish to use the RGB Color Space, select the pull-down
menu under that heading for Images Profile. Choose from the
following:
• Adobe RGB
• sRGB
• Xerox Consistent Color Mode RGB
• Xerox Consistent Color Mode RGB, Gamma = 1
-35