Printing Jobs
Printing jobs and managing job properties
P r od u c t Na me Bo o k N am e
your finishing selection. The Output Location menu is grayed-out
until you select a finishing option that is supported by multiple
sources. This prevents the job from faulting and prevents you from
having to locate the conflicting features.
NOTE: Due to Java limitations this feature cannot gray-out
individual selections within a pull-down menu. Conflicts resulting
between tabs and within pull-down menus are detected using the
Programming Conflicts dialog. If a conflict occurs, the
Programming Conflicts dialog opens. The conflict is described and
instructions are presented on how to resolve it.
Job Manager is designed to give you easy access to printing jobs
and managing job properties.
For certain tasks you can select more than one job by performing
one of the following:
•
Press and hold down the <CTRL> (Control) key and select
each individual job by left-clicking the mouse.
•
To select multiple files that are adjacent to one another, press
and hold down the <SHIFT> key and select the first and last
file names that you want from the list. This highlights the first
and last file name lines and all lines in between.
You can perform the following tasks within Job Manager:
•
Releasing a single job to print
•
Changing Job Properties
•
Renaming a job
•
Holding a print job
•
Releasing a held job to print
•
Pause and resume a job
•
Deleting a job
•
Cancelling a job
•
Previewing a job
•
Moving a job
•
Forwarding a job
•
Setting up a printing system name for job forwarding
•
Print Now (interrupting a job to print another job)
•
Printing a proof job
•
Promoting a job
-7