Xerox DocuColor 250 Online Help Manual page 51

P r od u c t Na me Bo o k N am e
name for the User-Defined Template. You may save a
template with the same name as a previously existing
user-defined template; in this case the newly saved
template overwrites the older one. However, you cannot
overwrite any of the preinstalled templates. If you try to do
so, an error message will appear.
NOTE: You must be logged on to the controller as
'operator' or 'System Administrator' to set up a custom
layout style.
10. Select [OK] to commit changes and exit the Layout Setup
window.
11. Select [OK], or continue setting job properties.
Setting Booklet options
To set booklet options:
1. Open the Job Manager.
2. Double-click the job you want to modify in the Active or
Inactive Jobs list.
3. Choose the Output tab.
4. Select the Layout FAB.
5. From the Layout Style pull-down menu select [Booklet], or
[Perfect Booklet].
6. Select the Original Orientation corresponding to your desired
output:
• Portrait
• Landscape
7. If desired, click [Setup...] to open the Advanced Settings
window.
NOTE: You must be logged on to the controller as 'operator'
or 'System Administrator' to edit the advanced settings.
a. To change the Reduce/Enlarge settings, select the radio
button for Custom underneath Reduce/Enlarge. Auto is the
default, and automatically scales the image(s) depending
upon which layout style you have chosen. Selecting
Custom enables you to scale the image(s) between 1%
and 1000%.
NOTE: Setting custom scaling can produce unexpected or
inappropriate results. For most applications, you should
leave the Auto button selected.
b. Select a checkbox under Margins to adjust them. You can
set a Gutter Margin or an Outside Margin between 0.01
"and 2.00". If your layout choice is Booklet, you may also
choose the signature shift option; however, this option is
not available for the Perfect Booklet layout. See Gutter and
-33