Xerox DocuColor 250 Online Help Manual page 181

P r od u c t Na me Bo o k N am e
NOTE: Users submitting jobs must know the exact name
of any finisher profiles in order to access the external
finishers. The user must enter the profile name on the job
ticket as a custom finishing option.
i. The device Type pull-down lists the names of the
finishing devices for which device profiles have been
created. Select the name of the device for which you
want to create a finisher profile.
ii. Enter the remaining properties for the device in the
appropriate fields.
– Function 1/Function 2: These pull-down menus are
only available if System Specified is the option selected
within the Device Setup Properties dialog window.
Function 1 and Function 2 are defined by the
manufacturer of your third-party finishing device.
Specify the following for each of the special functions:
Line Off turns off the function.
Line On turns on the function.
System Specified turns the function on and off when
specified by the system software, such as in a DJDE.
– Sheet Sequence: Indicates the order in which the
finished sheets may be delivered to the device output
tray: first to last (1 - N) or last to first (N - 1). Select one
or both options.
– Side 1 Direction: Indicates whether pages may be
stacked in the output tray face up, face down, or either
way. You can select one or more of these options.
– Rotate: Rotate indicates whether the printed page
must be turned 90 degrees before it passes through
the finishing device.
If the Device Type selected is External then the
available selections are Always and Never.
If the Device Type is Signature Booklet Maker the
option is System Specified.
b. The following fields require you to enter the minimum and
maximum defaults for your particular finishing device. The
range of values is shown below the text field for each
property.
– Minimum and Maximum Sheet Length indicates the
minimum and maximum sheet length that can be
processed by the finishing device.
– Minimum and Maximum Sheet Width indicates the
minimum and maximum sheet width that can be
processed by the finishing device.
-21