Xerox DocuColor 250 Online Help Manual page 103

P r od u c t Na me Bo o k N am e
you the status of the job process.
5. After the job is copied, select [OK].
Saving FRF jobs to a CD
To save FRF jobs to a CD, you will create a directory on the
DocuSP controller, save the FRF image file to that directory, and
copy the file from the controller to the CD.
To save the FRF jobs to a CD:
1. Open a terminal window:
a. Place the cursor on the desktop (outside the DocuSP
application window).
b. Right-click to open the Workspace Menu.
c. Select [Tools] to open the Tools menu.
d. Select [Terminal]. A Terminal window will open.
NOTE: Place the cursor inside the Terminal window to
activate the window. When the window is active, the prompt
will blink. The window must be active to type in the window.
2. Create a directory to store the FRF file.
a. Type cd /export/home/xrxusr and press [Enter].
b. Type mkdir cd_image and press [Enter].
3. Determine the location of the files to be placed on the CD.
a. Open the Print Service
b. Click on the directory containing the files to be saved.
c. The path to the directory will be listed at the bottom of the
screen.
4. Create the file to be written to the CD.
NOTE: It is important that the file size of the FRF file created
in this step is less than the capacity of the CD-R or CD-RW
media.
a. Go to the directory where the FRF file will be created.
b. Type cd /export/home/xrxusr/cd_image and press
[Enter].
c. Run the mkisofs command to create the image file to be
written to the CD: Type mkisofs -l -r -o your_image_file
FRF_saved_path and press [Enter].
NOTE: The "-o your_image_file" option in the mkisofs
command defines the name of the file to be written. Give the
file a meaningful name. It will be created in the directory from
which the mkisofs command is run. The "FRF_saved_path is
the FRF file location determined in step 3.
-9