Xerox DocuColor 250 Online Help Manual page 313

P r od u c t Na me Bo o k N am e
3. Select the Output tab.
4. Select the Basic Settings FAB.
5. In the Sides Imaged pull-down menu, select [2 Sided].
6. Select [Rotate Side 2].
7. Click [OK] to save changes and return to the Job Manager
main window.
How do I print a 2-up job head-to-toe?
To print a 2-up job head-to-toe:
1. Open the Job Manager.
2. Double-click the job you wish to edit. The Job Properties
window opens.
3. Select the Output tab.
4. Select the Basic Settings FAB.
5. In the Sides Imaged pull-down menu, select [2 Sided].
6. Select [Rotate Side 2].
7. Select the Layout FAB.
8. From the Layout pull-down menu, select the desired 2-up
layout (i.e. 2-up Flip Right, 2-up Cut and Stack).
9. Click [OK] to save changes and return to the Job Manager
main window.
How do I print letter size on larger paper?
You may print a letter or legal sized job on larger paper, but the
system has no facility to enlarge the actual image onto the new,
larger-size paper. If you wish to enlarge the images in a print job,
you must do this at the client workstation and resubmit the job to
the DocuSP controller.
How do I print 5.5 x 8.5 duplex?
To print duplex on a 5.5"x8.5" page, the original size of 5.5"x8.5"
must be set at the client application prior to submission to the
DocuSP controller.
Then, perform the following procedure:
1. Open the Job Manager.
2. Double-click the job you wish to edit. The Job Properties
window opens.
3. Select the Output tab.
4. Select the Basic Settings FAB.
5. In the Sides Imaged pull-down menu, select [2-Sided].
6. Click [OK] to save changes and return to the Job Manager
-13