Xerox DocuColor 250 Online Help Manual page 105

P r od u c t Na me Bo o k N am e
Holding a job
If you want to submit a job to print, but you wish to delay printing of
the job, you can place the job on hold. The job will be sent to Job
Manager where it can be modified and/or released. When a job is
held it needs to process again before is can be printed. Printing
starts at the beginning of the job.
To hold a job:
1. Open the Print Service.
2. Double-click the job you want to print and make any property
changes.
3. Select [Print].
4. The job is sent to Job Manager. Right click the job in Job
Manager and select [Hold]. The job can then be modified and/
or released.
Using Print Now
The Print Now feature allows you to interrupt a job that is currently
printing in order to print a different job or jobs. After all Print Now
jobs have completed printing, the controller resumes printing the
original interrupted job.
To interrupt a job:
1. Open the Print Service.
2. Locate the job you want to print.
3. Right-click the job(s) and select [Print Now] or [Print Now
Selected...].
4. Make any desired property selections and click [Print Now].
Selected jobs print.
NOTE: A newly assigned Print Now job will not interrupt an active
Print Now job. The newest Print Now job is added to the end of the
active interrupt job list. Any Print Now jobs requiring unavailable
resources (such as special media or finishing), are ineligible and
will not be scheduled as a Print Now job until the resource is made
available.
.
-11