Xerox DocuColor 250 Online Help Manual page 275

User Preferences
Formatting a diskette
P r od u c t Na me Bo o k N am e
Adjusting the brightness of the LCD monitor
The brightness level of the monitor can be adjusted by the user.
To adjust the brightness of the LCD monitor:
1. From the Setup menu select [LCD Monitor...].
2. Use the arrows to adjust the brightness level.
3. Click [Close] to commit your changes and exit the dialog
window.
DocuSP allows the Administrator or Operator to choose the font
size displayed on the DocuSP GUI. The font size choices are
small, medium, or large. The default setting is small.
Changing the GUI font size in User Preferences
To change the GUI font size preference:
1. From the System menu, select [User Preferences...].
2. Choose a font size from the User Font Preferences dialog.
3. Click [OK]. You are prompted to restart DocuSP.
4. Select [Yes] to restart.
For the system to write files on a diskette, the diskette must be
formatted. Formatting also erases any files that are on the
diskette. The system can read diskettes in DOS or XRXLPS
formats. It can write only to DOS formatted diskettes.
NOTE: This procedure formats the diskettes in DOS only.
To format a diskette:
1. Slide the diskette you want to format into the diskette drive
until it locks in place.
2. Select [Configuration...] from the DocuSP Setup menu.
3. Select the Peripherals tab.
4. Select the diskette from the Media list.
NOTE: The name that appears for your diskette drive initially is
"Diskette 0." If you rename it, the new name replaces the "0", but
the word Diskette always precedes the diskette drive name on the
Media list.
5. Right-click on the diskette and select [Format/Initialize...].
-51