Xerox DocuColor 250 Online Help Manual page 114

- 8
10. In the Queue list, right-click the new queue and choose
[Accept Jobs] to enable the queue for job processing.
Copying a queue
Sometimes an existing queue already contains most of the
attributes you need for a new queue. In that case you can simply
copy an existing queue and modify its attributes to create a new
queue.
To copy an existing queue:
1. Open Queue Manager.
2. From the Queue pull-down menu select [Copy...]. The Copy
Queue dialog opens.
3. In the Queue Name field, enter a meaningful name that will
help you identify the queue. For example, if the queue is set to
release jobs, the name may be PRINTER20RELEASE. The
name may consist of letters and/or numbers and can have up
to 25 characters, including underscores.
NOTE: When creating a queue to be used for lp/lpr printing,
the queue name must be limited to 14 characters. A queue
name longer than 14 characters will not be visible to the lp/lpr
gateway. This is a limitation of the gateway.
NOTE: The Printer Name is read only. It contains the name of
the connected printer.
4. Select a quantity to indicate the number of job sets that will be
printed for all jobs sent to this queue unless a different quantity
is specified in the job, itself. Select a number between 1 and
65,500.
Select [Override] if you want the Quantity setting to take
precedence over programming associated with individual jobs.
5. Set a priority between 1 (highest priority) and 100 (lowest
priority) for the queue. The default priority setting is 50.
Each queue for the printer is assigned a priority. The priority
tells the system the order in which the queues should be
processed. All jobs in the queue with the highest priority are
processed before jobs in queues with lower priorities. If a
priority is not set, a default priority of 50 is assigned to the
queue when it is created. If more than one queue has the
same priority, the queues are processed in repeating
succession.
6. If desired, make extended option selections using the following
tabs:
• The Settings Tab: The Settings tab contains queue
properties FABs.
• The Stock Tab: Select the queue default paper stock.
• The Output Tab: Allows you to select queue output options.
P r o du c t N am e B o ok N am e