P r od u c t Na me Bo o k N am e
These tabs include:
•
Settings tab (see The Settings tab)
•
Stock tab (see The Stock Tab)
•
Output tab (see The Output Tab)
•
Image Quality tab (see The Image Quality Tab)
•
Image Edit tab (see The Image Edit Tab)
•
Special Pages tab (see The Special Pages Tab)
4. After you are finished editing the job settings, click [OK] or
[Apply] to save the settings.
5. Click [Close] to return to the Job Manager main window. From
there you can print your newly-edited job.
How do I make image quality adjustments?
To use the Image Quality tab:
1. Open Job Manager.
2. Double-click a job in the Active or Inactive Jobs list.
3. Select the Image Quality tab.
4. Select the Options FAB to access controls for Black Overprint,
Anti-aliasing, and Trapping. Once you have edited these
settings, select [Apply]. Your settings will be listed on the FAB.
5. Select the Image Adjustments FAB to adjust lightness,
contrast, saturation, and color cast settings. Once you have
edited these settings, select [Apply]. Your settings will be listed
on the FAB.
6. Select the User TRCs FAB. Any user TRCs that have been
created are accessible through the pull-down menu. You may
also view the curves by selecting [View Curves...]. Once you
have edited these settings, select [Apply]. Your settings will be
listed on the FAB.
7. Select the Halftone FAB. You can select from the following:
•
System Specified
•
200 Dot (Primary)
•
150 Dot
•
200 Line
•
300 Line
•
600 Line
NOTE: Depending upon which printer you have, you may see
different halftone options.
8. Once you have edited these settings, select [Apply]. Your
settings will be listed on the FAB.
9. Select the Image Resample FAB to select an interpolation
-3