Xerox DocuColor 250 Online Help Manual page 218

UNIX Terminal Window
Powering on/off and restarting the system and printer
- 6
window provides the phone number for service. The service
contact number may request information displayed in the
Diagnostics window such as Software Level, Printer Serial
Number or fault codes. To access diagnostics, select [Service
Diagnostics...] from the DocuSP System menu.
The following tasks can be performed by a Trusted User or
System Administrator:
• Change Password
• Restore Install Site Settings
• View Printer Data, including Feeders, Print Engine and
Finishing information.
The UNIX Terminal Window option is a standard shell launched
from the System menu. User access rights determine the level of
access to system services. Operators and Walk-up Users have
access to a default set of commands.
The System Administrator can enable the automatic logon feature
on the General tab of security profile properties.
Using the Console option
To use the UNIX Console:
1. From the System menu select [UNIX Terminal Window...] to
open the System Administrator dialog window.
2. Enter commands. Operators and Walk-up Users can use a
default set of commands.
Performing a deferred shutdown and restart
A deferred shutdown allows all currently processing jobs to
complete before the system is restarted; however no new jobs are
accepted until after the system has been restarted. This feature is
available to a System Administrator or Operator.
To perform a deferred shutdown and restart:
1. Open Queue Manager.
2. Select a queue. If more than one queue is present, choose
[Select All] from the View pull-down menu.
3. From the Queue pull-down menu select [Do Not Accept Jobs]
and then select [Do Not Release Jobs].
P r o du c t N am e B o ok N am e