R0E530640MCU00 User's Manual
2.3 Connecting/Disconnecting the MCU Unit to/from the E100 Emulator Main Unit
Figure 2.3 shows the procedure for connecting the MCU Unit to the E100 Emulator Main Unit.
Connecting
MCU Unit
R0E530640MCU00
E100 emulator main unit
R0E001000EMU00
Disconnecting
Figure 2.3 Connecting/Disconnecting the MCU Unit to/from the E100 Emulator Main Unit
Note on Connecting the MCU Unit to the E100 Emulator Main Unit:
Always shut OFF power when connecting the MCU unit to the E100 emulator main unit. Otherwise, internal
circuits may be damaged.
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 25 of 229
Insert the MCU unit
following the inside
rails of the main unit.
Pull the MCU unit up.
CAUTION
Push the MCU unit down
to check it is attached properly.
2. Setup