Executing The Self-Checking Program - Renesas E1 User Manual

E1/E20 Emulator
A.3 Executing the Self-Checking Program
(1) Execute the E1/E20 Self Check Program (E1E20SCP.exe).
When installing the High-performance Embedded Workshop RX E1/E20 debugger, open the start menu and
select [Programs] -> [Renesas] -> [High-performance Embedded Workshop] -> [E1/E20 Self Check Program].
When installing the CubeSuite+, open the start menu and select [Programs] -> [Renesas Electronics
CubeSuite+] -> [Emulator Utilities] -> [RX] -> [E1, E20 Emulator Self Check Program].
If you are using any other debugger product, refer to its manual, or install the self-checking program from
included installation media, then open the start menu and select [Programs -> Renesas -> E1E20SCP ->
E1E20 Self Check Program].
R20UT0398EJ0401 Rev.4.01
Mar 15, 2016
Figure A.2 Starting the Self-Checking Program
Appendix A
Page 31 of 40