Starting The High-Performance Embedded Workshop; Connecting The Emulator - Renesas M16C/64 User Manual

R0E530640MCU00 User's Manual 3. Tutorial

3.2 Starting the High-performance Embedded Workshop

Open a workspace following the procedure described in Section 4.4, "Opening an Existing Workspace"
For the directory, specify the one that is given below.
OS installed drive\Workspace\Tutorial\E100\M16C
For the file, specify the one that is shown below.
Figure 3.1 Open Workspace dialog box

3.3 Connecting the Emulator

When the debugger is connected to the emulator, a dialog box for setting up the debugger is displayed. In this dialog box,
make initial settings of the debugger.
When you have finished setting up the debugger, you are ready to debug.
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 37 of 229