H.323 Setup - Polycom ViewStation H.323 User Manual

Chapter 1 Getting Started
ViewStation H.323 User's Guide

H.323 Setup

On the H.323 Setup screen, specify the H.323 name and extension that
people can use to call your ViewStation. The ViewStation automatically
provides values in the two fields based on information you specified earlier.
You can change the values. For example, for the extension, you might use
a number that you can easily remember, such as the last four digits of your
telephone number.
You can use either the name or extension to accept incoming calls. The
name and extension can be used only if you have a Gatekeeper installed on
your network. The name and extension must be registered with the
Gatekeeper. When someone calls you using the H.323 name or extension,
the Gatekeeper directs the call to the IP address of your system.
To enter information, press the SELECT button to display the keyboard.
Use the arrow buttons on the remote to move around the keyboard and
select letters. To select a letter, highlight the letter and press the SELECT
button. Use the spacebar on the keyboard to enter spaces. Use the Shift key
to select uppercase for a letter. When you are done, highlight the Enter key
on the keyboard and press the SELECT button. Then, highlight the Save
icon on the screen and press the SELECT button on the remote.
10 www.polycom.com