Placing A Call From The Web Interface; Placing A Call Using The Application Programming Interface; Answering A Video Call Manually - Polycom ViewStation EX User Manual

Placing a Call from the Web Interface

Placing a Call Using the Application Programming Interface

Answering a Video Call Manually

© Polycom, Inc. 2003
1. To lock the number, highlight the entry on the Speed Dial
screen.
2. Press the # button on the remote control. A Lock icon appears
next to Speed Dial entries that are locked.
To unlock a Speed Dial entry:
1. To unlock a number, highlight the entry.
2. Press the * button on the remote control.
For instructions about how to place a video call from the Web
interface, refer to Features of the Web Interface on page
For instructions about how to place a call using the API, refer to the
ViewStation EX, ViewStation FX, and VS4000 ARENA API
Programmer's Guide.
The ViewStation EX is set by default to automatically answer
incoming calls.
To set your system to answer video calls manually:
1. From the main screen, select System Info > Admin Setup >
General Setup or select System Info > User Setup.
2. Highlight the field next to Auto Answer Point to Point, and
select the No option from the drop-down menu.
3. When there is an incoming call, the user will be prompted with
a message "You have a video call. Would you like to answer?"
This message is followed by a video number and a far-site name
Chapter 5 - Using the ViewStation EX
229.
155