Turn Off Flashing Alerts; Setting Up Audio-Only Calls; Enable Audio-Only Calls; Disable Audio-Only Calls - Polycom RealPresence Group Series Administrator's Manual

Turn Off Flashing Alerts

You can turn off flashing alerts when the visual cue is not necessary in the RealPresence Group Series
system web interface.
Procedure
1. In the system web interface, go to Admin Settings > General Settings > System Settings > Call
Settings.
2. Clear the Enable Flashing Incoming Call Notification checkbox.
3. Click Save.

Setting Up Audio-Only Calls

You can enable and disable audio-only calls in the RealPresence Group Series system web interface.

Enable Audio-Only Calls

You can enable audio-only calls in the RealPresence Group Series system web interface.
Procedure
1. In the system web interface, go to Admin Settings > Network > Dialing Preference > Dialing
Options > and select Enable Audio-Only Calls.
2. Click Save.

Disable Audio-Only Calls

You can disable audio-only calls in the RealPresence Group Series system web interface.
Procedure
1. In the system web interface, go to Admin Settings > Network > Dialing Preference > Dialing
Options and clear the Enable Audio-Only Calls checkbox.
2. Click Save.

Select the Call Type Order for Audio-Only Calls

When Audio-Only Calls is enabled on your RealPresence Group Series system, you can choose the
audio order and dialing preference.
Procedure
1. In the system web interface, go to Admin Settings > Network > Dialing Preference > Dialing
Options.
2. At Call Type Order, select Phone then Video.
3. For the Audio Dial Preference 1, Audio Dial Preference 2, and Audio Dial Preference 3
settings, choose from the following call types:
• IP H.323
• SIP
Polycom, Inc.
Configuring Call Settings
128