Placing A Call From The Address Book - Polycom ViewStation H.323 User Manual

Placing a Call from the Address Book

You can easily access address book entries by selecting the letter (number) on the
Tip
remote control that corresponds to the first letter of the name you want. For example, to
easily find Mr. Thomas, press the number 8 on the numeric keypad of the remote control.
The letter T corresponds to the number 8 on the telephone. When you press 8, the
ViewStation displays the "T" section of the address book.
© Polycom, Inc.
1. To place a call to an entry in the address book, highlight the entry you
want to call. Then, press the SELECT button on the remote.
2. The call name, number, and the speed of the call are displayed at the
top of the screen. On the lower left side of the screen, a call progress
indicator shows the progress of connecting the call. The indicator
changes from blue to yellow to orange, and finally to green when the
call completes.
3. To end your call, press the CALL•HANG-UP button on the remote.
The Call Hangup Choices screen is displayed. Select Disconnect
Video Call to disconnect your call. If you stay on this screen for more
than 60 seconds, the call is disconnected automatically.
21
Chapter 2 Placing and Answering Calls
ViewStation H.323 User's Guide