Reset Arp - H3C IE4300 Command Reference Manual

reset arp

Use
reset arp
Syntax
reset arp { all | dynamic | interface interface-type interface-number |
multiport | slot slot-number | static }
Views
User view
Predefined user roles
network-admin
Parameters
: Clears all ARP entries.
all
: Clears all dynamic ARP entries.
dynamic
multiport
: Clears all static ARP entries.
static
slot slot-number
member device, this command clears ARP entries for the master device.
interface interface-type interface-number
number. If you do not specify an interface, this command clears ARP entries for all interfaces.
Usage guidelines
CAUTION:
The
reset arp
external users cannot quickly communicate with the LAN users. Make sure you are fully aware of the
impacts of this command when you use it on a live network.
Examples
# Clear all static ARP entries.
<Sysname> reset arp static
Related commands
arp static
display arp
to clear ARP entries from the ARP table.
: Clears all multiport ARP entries.
: Specifies an IRF member device by its member ID. If you do not specify a
command will clear existing ARP entries from the ARP table. It might cause that
: Specifies an interface by its type and
20