Installing A Reference Cell Holder; Using The Spectrophotometer; Computer Control Instruments - Thermo Scientific Evolution 200 Series User Manual

3
Evolution 200 Series Spectrophotometers

Using the Spectrophotometer

Installing a Reference Cell Holder

Using the Spectrophotometer

Computer Control Instruments

126 Evolution 200 Series User Guide
To install a reference cell holder
1. Open the reference compartment cover. See
Reference Compartment
2. Grasp the cell holder by the handle and lower it into the reference compartment.
3. Insert the pin in the alignment hole and press the holder in place.
4. Close the reference compartment cover.
For operating instructions, see
Related Topics
Installing a Smart Accessory
Installing a Manual Accessory
Installing a Liquid Thermostatted Accessory
This section explains how to set up a Computer Control or Local Control spectrophotometer
and perform basic operations using the keypad.
Contents
• Computer Control Instruments
• Local Control Instruments
Computer Control instruments must be connected to an external computer with the proper
software installed.
Opening and Closing the Sample and
Doors.
Handle
Reference Cell Holders.
Thermo Scientific