Thermo Scientific Evolution 200 Series User Manual page 58

2
INSIGHT Software
Operation
44 Evolution 200 Series User Guide
Feature
Table of wavelengths
Autoscale
Ordinate Y scale
Description (optional) Description of the template.
Related Topics
Setting Application Parameters
Fixed
Accessories Tab for Fixed
Samples Tab for Fixed
Accessories Tab for Fixed
The status of accessories can be monitored
Related Topics
Accessories
Setting Application Parameters
Fixed
Instrument Status Monitors
Instrument Tab for Fixed
Samples Tab for Fixed
Description
Wavelengths at which measurements will be made, plus the
corresponding control limits if specified (see above). The number
of required wavelengths depends on the setting of Result mode (see
above). To enter or change the value in a table cell, click it and
type. To order the list by wavelength, lower control limit or upper
control limit, click the appropriate column heading.
Autoscale automatically adjusts the Y-axis scale for optimal viewing
of data during a measurement.
To specify the Y-axis display limits, deselect Autoscale and set Max
and Min to the desired maximum and minimum Y values,
respectively, in the range 400 to -400.
Click Settings in
the right pane. The available parameters depend on the
installed accessories. See
during measurements.
Fixed to display the Accessories tab in
Accessories for details.
Thermo Scientific