Thermo Scientific Evolution 200 Series User Manual page 66

2
INSIGHT Software
Operation
52 Evolution 200 Series User Guide
If only the Type tab appears, set its parameters. Click Next at the bottom
of the tab to set parameters on the next tab, and so on. To return to the
previous tab, click Previous. Click Finish when ready to complete the
process. To cancel the operation, click Cancel.
Note Change Quant settings only before sample measurements. All Quant measurements
saved in a workbook must be made with the same settings. See
Parameters for information about unlocking settings.
Related Topics
Quant
Formulas and Units Tab
Quantifying Sample Data
Performing a Quantitative Analysis
Type Tab for Quant
Feature Description
Name (if present) User group name followed by the name of the template of settings
(entered when the template was saved using Save Workbook Settings as
Template in the File menu).
Description Optional description of the template.
(optional)
Quant Type Type of quantitative analysis (see the table below). An image
representing the selected type appears to the right. The required tabs also
appear (click the Reset action button to step through them).
Click Settings in Quant
right pane.
Setting Application
to display the Type tab in the
Thermo Scientific