Using The Peak/Valley Measurement Tool; Using The Peak Area Tool; Using The Region-Threshold Tool; Using The View Finder - Thermo Scientific Evolution 200 Series User Manual

Using the Peak/Valley Measurement Tool

Thermo Scientific
Note To display the palette, click
To view the X and Y values of a point
1. Select the spectral cursor tool.
2. Click the data display.
Cross hairs appear. The X and Y coordinates of their intersection with the spectrum
appear below the palette.
To move the cross hairs, drag across the pane or use the left and right arrow keys on the
keyboard.
To remove the cross hairs from the display, select another tool such as the selection tool.
Related Topics
Using the Selection Tool
Using the Peak/Valley Measurement Tool

Using the Peak Area Tool

Using the Region-Threshold Tool

Using the View Finder

Use the peak/valley measurement tool (if present) to measure the height of a peak or depth of
a valley from a specified baseline.
Note To display the palette, click
To measure a peak or valley
1. Select the peak/valley measurement tool.
2. Click the data display.
A vertical line appears. The X and Y coordinates of its intersection with the spectrum
appear below the palette.
3. Drag the line by its diamond-shaped handle to the peak or valley to measure.
4. Drag the triangular baseline handles to the desired baseline endpoints.
The height or depth of the peak or valley appears below the palette.
.
.
Evolution 200 Series User Guide
2
INSIGHT Software
Operation
37