Thermo Scientific Evolution 200 Series User Manual page 339

Using the Peltier Controller to Set Temperature and Stir Speed
Thermo Scientific
Note The temperature controller option appears only when a temperature controller
software driver is installed.
2. Select Temperature controller status and click OK.
The status monitor appears above the data display.
Related Topics
Temperature and Stir Speed Settings
Configuring a Target Temperature
To start the controller, turn on the power switch on the controller back panel.
Contents
• Startup Mode
• Standby Mode
• Normal Mode
Startup Mode
After the controller power is turned on, the display appears in one of three modes: Stand-By,
Normal, or Alarm. The image below indicates Normal mode.
Stirring Actual block
speed temperature
Block set temperature
Peltier Thermostatted Single Cell Holder
Heating/cooling
power scale
Evolution 200 Series User Guide
20
325