Thermo Scientific Evolution 200 Series User Manual page 54

2
INSIGHT Software
Operation
Using the View Finder
40 Evolution 200 Series User Guide
Using the Peak/Valley Measurement Tool
Using the Peak Area Tool
Using the View Finder
For data analysis operations such as locating peaks, use the view finder (if present) to adjust
the data display.
Note To display the view finder, click
The currently displayed region is indicated by the region markers, the bold vertical lines.
To expand horizontally
Click the top half of the Horizontal Expand/Contract button. To contract
horizontally, click the bottom half.
To expand vertically
Click the left half of the Vertical Expand/Contract button. To contract vertically,
click the right half.
To expand or contract vertically while keeping the top or bottom of spectra in place
To expand vertically while keeping the bottom of the spectra in place, click the
symbol at the top of this button.
To expand vertically while keeping the top of the spectra in place, click the symbol
at the right.
To contract vertically while keeping the bottom of the spectra in place, click the
symbol at the bottom.
To contract vertically while keeping the top of the spectra in place, click the symbol
at the left.
To display a different region of the same size
There are three ways to do this:
• To move the spectrum to the right, click the top half of the Roll button.
.
Thermo Scientific