Mercury Lamp Access Cover - Thermo Scientific Evolution 200 Series User Manual

Mercury Lamp Access Cover

Thermo Scientific
External fluid ports
Internal fluid ports for routing fluid from the instrument to an installed accessory are located
inside the sample compartment.
Internal fluid ports
The connectors fit 1/4-inch internal diameter tubing. An adapter may be required to connect
the tubing to the accessory or recirculator. Purchase adapters separately.
Cords and cables for installed accessories can also be routed behind this panel. Push the cord
through the foam and the opening below it. The panel itself can be removed temporarily to
accommodate a large connector. To remove the panel, loosen the screw.
Related Topics
Installing a Liquid Thermostatted Accessory
WARNING Avoid UV radiation hazard in the mercury lamp compartment. Protect eyes
and skin from exposure.
Languages
Foam
Screw
3
Evolution 200 Series Spectrophotometers
Spectrophotometer Basics
Evolution 200 Series User Guide 113