Thermo Scientific Evolution 200 Series User Manual page 349

Uv-vis instruments

Table of Contents

Thermo Scientific

To clean a probe purchased from us

1. Dampen lens paper or a soft cotton swab with one of the following agents:

• Isopropyl alcohol

• Deionized water (can leave spots that affect performance).

2. Using minimal pressure, wipe the probe optics and shaft with the dampened lens paper or

NOTICE Do not soak the lens paper or swab with the cleaning agent. This may leave

pools of liquid that do not dry properly.

To remove stubborn materials, use a small amount of acetone.

Table of Contents

Troubleshooting