Thermo Scientific Evolution 200 Series User Manual page 391

Thermo Scientific
To install the cell changer
1. Open the sample compartment cover.
2. Remove the sample compartment front panel. See
3. Remove the tubing access panel. See
4. Remove any existing cell holder or accessory.
5. Connect one end of the provided flat cable to the cell holder.
6. Install the cell changer in the spectrophotometer sample compartment. See
Smart Accessory.
The software displays a prompt to initialize the accessory.
CAUTION Avoid pinch hazard. Keep hands and objects clear of the accessory during
initialization.
Languages
ATTENTION Évitez tout risque de pincement. Gardez vos mains, ainsi que tout objet,
à l'écart de l'accessoire pendant l'initialisation.
VORSICHT Quetschungen sind zu vermeiden. Hände und Objekte sind während der
Initialisierung vom Zubehör fern zu halten.
SPE-8W Smart Peltier Linear Cell Changer
Sample Compartment Front
Tubing Access Panel.
Cable Connector
Evolution 200 Series User Guide
26
Panel.
Installing a
377