Thermo Scientific Evolution 200 Series User Manual page 243

Accessories Tab for Protein Biuret
Samples Tab for Protein Biuret
Thermo Scientific
The status of accessories can be monitored during measurements. See
Monitors.
Related Topics
Type Tab for Protein Biuret
Measurement Tab for Protein Biuret
Standards Tab for Protein Biuret
Instrument Tab for Protein Biuret
Samples Tab for Protein Biuret
Feature Description
Number of samples Number of samples in the analysis.
Base name Beginning of the name for sample spectra, to which a sequential
number is appended. For example, the names of three sample spectra
using the base name "dye" would be dye1, dye2 and dye3.
Sample averaging Whether and how to average concentration values from multiple
measurements of the same sample or from multiple samples. To
average multiple measurements of the same sample, select Replicate
and set Number of replicates to the total number of measurements.
To average values from two or three samples, select Duplicate or
Triplicate, respectively.
Use concentration Displays high and low limit lines on the Run Chart tab to show
limits whether sample concentrations are within the specified limits.
Use weight/volume If available for the current unit, corrects sample concentrations using
correction the entered target weight and volume:
corrected concentration = measured concentration * (actual weight /
target weight) * (target volume / actual volume)
Click Settings in Protein Biuret
Accessories tab in the right pane. The available
parameters depend on the installed accessories. See
Accessories for details.
Click Settings in Protein Biuret
tab in the right pane.
4
Life Science Applications
Protein Biuret
to display the
Instrument Status
to display the Samples
Evolution 200 Series User Guide 229