Thermo Scientific Evolution 200 Series User Manual page 317

Table 2. Normal Mode functions
Page Display
Main Menu Parameter
Configure
Diagnostic
Change Set Flashes selected
Point parameter
Thermo Scientific
Alarm Mode
Preinstallation
Installation
Maintenance
Troubleshooting
Normal Mode
Contents
• Button Functions
• Parameters Menu
• Configure Menu
• Diagnostic Menu
Button Functions
• Press the left (Menu) button to go to the Main Menu page.
• Press and hold the center (Off ) button for one to two seconds to return to Stand-By
Mode.
• Press the right (Change) button to go to the Change Set Point page.
Description
User Parameters
Configuration Parameters
Diagnostic Values
Change Temperature Set Point
Changing the set temperature
1. From the main Normal Mode page, press the Change button to highlight Set
Temperature.
The Change Set Point page appears with down and up arrows above the Left and Center
buttons.
2. Use the down and up arrow buttons to change the set temperature.
TPS-1500W Sealed Peltier Recirculator
Left button Center button
Scroll Select
Scroll Up
Down Up
Down Up
Evolution 200 Series User Guide
19
Right button
Exit
Exit
Exit
Change
303