Peltier Thermostatted Single Cell Holder
Thermo Scientific
This accessory includes a thermostatted single cell holder for standard 10 mm pathlength
cuvettes and a Peltier temperature controller that connects to a USB port on the
spectrophotometer or computer. The accessory requires a water pump or recirculator which
must be purchased separately. Cell temperature can be controlled two ways: from the Peltier
controller front panel or from the spectrophotometer using INSIGHT software. The Peltier
controller may also be used to agitate the sample by placing a magnetic stirrer in the cuvette
and selecting the stir speed.
Contents
•
General Safety Information
•
Product Description
•
Preinstallation
•
Installation
•
Operation
•
Maintenance
•
Troubleshooting
Related Topics
TPS-1500W Sealed Peltier Recirculator
Controller
Cell holder
Evolution 200 Series User Guide
20
311