Thermo Scientific Evolution 200 Series User Manual page 399

Thermo Scientific
Displaying the Temperature Status Monitor
Using INSIGHT Software to Set Temperature and Stir Speed
Displaying the Temperature Status Monitor
When a Peltier temperature-controlled accessory is installed, the INSIGHT software can be
configured to display a temperature status monitor above the data display.
To display the temperature status monitor
1. Click the Configure button above the data display for the selected application. See
Instrument Status Monitors for more information.
A dialog box lists the available status monitors.
Note The temperature controller option appears only when a temperature controller
software driver is installed.
2. Select Temperature controller status and click OK.
The status monitor appears above the data display.
Related Topics
Temperature and Stirrer Settings
Configuring a Target Temperature
Using the Peltier Controller to Set Temperature and Stir Speed
Using the Peltier Controller to Set Temperature and Stir Speed
To start the controller, turn on the power switch on the controller back panel.
Contents
• Startup Mode
• Standby Mode
• Normal Mode
Startup Mode
After the controller power is turned on, the display appears in one of three modes: Stand-By,
Normal, or Alarm. The image below indicates Normal mode.
SPE-8W Smart Peltier Linear Cell Changer
Evolution 200 Series User Guide
26
385