Installing A Liquid Thermostatted Accessory - Thermo Scientific Evolution 200 Series User Manual

3
Evolution 200 Series Spectrophotometers
Accessories

Installing a Liquid Thermostatted Accessory

124 Evolution 200 Series User Guide
5. Replace the sample compartment front panel. See
6. Close the sample compartment door. See
Compartment Doors.
7. Click OK to initialize the accessory.
Initialization reads information about the accessory and, for cell changers, moves it to
position 1.
For operating instructions and installation details, see the accessory name under Accessories.
To remove a Smart Accessory
1. Open the sample compartment door. See
Reference Compartment
2. Remove the sample compartment front panel. See
3. Grasp the handles and pull the accessory up and out of the sample compartment.
The software confirms the accessory has been removed.
4. Replace the sample compartment front panel. See
5. Close the sample compartment door. See
Compartment Doors.
Related Topics
Installing a Liquid Thermostatted Accessory
Installing a Manual Accessory
Installing a Reference Cell Holder
A liquid thermostatted accessory has ports and internal chambers for circulating fluids
through the unit for temperature-controlled measurements. Other accessories circulate fluids
to cool heated components.
The Recirculator Tubing Kit provides parts for connecting an accessory to a fluid recirculator.
To install a thermostatted accessory
1. Install the accessory.
See Installing a Manual Accessory
2. Remove the tubing access panel. See
Opening and Closing the Sample and Reference
Opening and Closing the Sample and
Doors.
Opening and Closing the Sample and Reference
or Installing a Smart
Tubing Access
Sample Compartment Front
Sample Compartment Front
Sample Compartment Front
Accessory.
Panel.
Panel.
Panel.
Panel.
Thermo Scientific