B • Installing Dc Options; Installing The Ed Amperometry Cell; Unpacking And Disassembling The Cell - Thermo Scientific Dionex ICS-5000+ Installation Instructions Manual

This appendix provides instructions for installing the following DC options:
•
ED amperometry cell
•
Low-pressure valves
•
Injection valve panel
•
Dionex ICS-5000
•
Dionex ICS-5000
Capillary
IC
B.1

Installing the ED Amperometry Cell

Always wear gloves when handling the ED cell. Never touch
NOTE
the electrode surface.
B.1.1

Unpacking and Disassembling the Cell

1. Remove the
parts.
Yoke Knob and
Doc. 065447-02 12/14
B • Installing DC Options
(Section
(Section B.2)
(Section B.3)
+
Automation Manager
+
IC Cube (Section
ED cell from the box. Refer to
Block
Tab
Spacer Block
Cell Body
Figure B-1. ED Cell Components
B.1)
(Section B.4)
B.5)
Figure B-1
Cell Outlet
(with fitting plug)
Note: The titanium cell
inlet tubing is used only
for analytical IC.
Cell Cable
to identify the cell
Cell Inlet
127