Thermo Scientific Evolution 200 Series User Manual page 304

Uv-vis instruments

Table of Contents

Evolution 200 Series User Guide

What needs to be cleaned after each use? The top of the nanoCell only, or the inner

part of the lid as well?

To eliminate sample carry-over or mixing two liquids together and improve accuracy,

clean the inner part of the lid between measurements. See

Can I use solvents to clean the surface of the nanoCell? If so, which solvents?

The most suitable solvents for cleaning are methanol, ethanol, and isopropanol. Do

not use strong acids and bases or any of the following solvents with the nanoCell:

ethylamine, diethylene triamine, methylene chloride, and phosphoric acid. See

Cleaning the

Table of Contents

Troubleshooting