Thermo Scientific Evolution 200 Series User Manual page 400

26
SPE-8W Smart Peltier Linear Cell Changer
Table 7. Startup modes and button functions
Page Mode
Startup Standby
Normal
Alarm
*Only if the manual alarm reset option has been configured
386 Evolution 200 Series User Guide
Stirring Actual block
speed temperature
Block set temperature
Display
Standby
Actual block temperature
Block Set temperature
Stirring speed (left)
Heating/cooling power (right)
Alarm description
Standby Mode
• Press and hold the Center button for one to two seconds to proceed to Normal Mode.
Normal Mode
Button Functions
• Press the Left button to go to the Main Menu page.
• Press the Right button to go to the Change Set Point page.
• Press and hold the Center button for one to two seconds to return to Stand-By Mode.
• From the Startup page in Normal Mode, use the Change button to move about the
screen.
Heating/cooling
power scale
Left button Center button
On
Menu Off
(Go to Main
Menu)
Menu Beep on/off
Right button
Change (Go to
Change Set Point
Page)
Reset alarm/change*
Thermo Scientific