Thermo Scientific Evolution 200 Series User Manual page 180

4
Life Science Applications
Protein A280
Accessories Tab for Protein A280
Samples Tab for Protein A280
166 Evolution 200 Series User Guide
The status of accessories can be monitored during measurements. See
Monitors.
Related Topics
Type Tab for Protein A280
Measurement Tab for Protein A280
Instrument Tab for Protein A280
Samples Tab for Protein A280
Feature Description
Number of samples Number of samples in the analysis.
Base name Beginning of the name for sample spectra, to which a sequential
number is appended. For example, the names of three sample spectra
using the base name "dye" would be dye1, dye2 and dye3.
Sample averaging Whether and how to average concentration values from multiple
measurements of the same sample or from multiple samples. To
average multiple measurements of the same sample, select Replicate
and set Number of replicates to the total number of measurements.
To average values from two or three samples, select Duplicate or
Triplicate, respectively.
Use concentration Displays high and low limit lines on the
limits whether sample concentrations are within the specified limits.
Related Topics
Type Tab for Protein A280
Measurement Tab for Protein A280
Instrument Tab for Protein A280
Click Settings in Protein A280
tab in the right pane. The available parameters depend
on the installed accessories. See
Click Settings in Protein A280
tab in the right pane.
to display the Accessories
Accessories for details.
Instrument Status
to display the Samples
Run Chart tab to show
Thermo Scientific