Troubleshooting - Thermo Scientific Evolution 200 Series User Manual

26
SPE-8W Smart Peltier Linear Cell Changer

Troubleshooting

394 Evolution 200 Series User Guide
Problem Possible Cause
Absorbance val- The accessory is not
ues are inconsis- aligned properly
tent or higher
than expected
Temperature or Recirculator
memory failure malfunction or
incorrect use
Related Topics
General Safety Information
Product Description
Preinstallation
Installation
Operation
Maintenance
Solution
Calibrate and then initialize the cell changer. See
Calibrating the Cell Changer
Cell Changer.
NOTICE Immediately turn off the main
power switch and then turn it on again. If the
failure reoccurs, turn off the power and
contact technical support. See
and Initializing the
Contacting Us.
Thermo Scientific