Temperature Settings; Configuring A Target Temperature; Displaying A Temperature Status Monitor - Thermo Scientific Evolution 200 Series User Manual

29
Temperature Probe

Temperature Settings

434 Evolution 200 Series User Guide
• Temperature Settings
•

Configuring a Target Temperature

•

Displaying a Temperature Status Monitor

Related Topics
Operating Precautions
Installation
Maintenance
Troubleshooting
In the selected application, use Settings > Accessories > Temperature to display the available
settings for a temperature probe or controller. The Temperature features appear only when the
driver for a temperature probe or controller is installed.
Feature
Record temperature with mea-
surement
Use temperature controller
Start measurements at target
temperature
Match probes to cell changer
positions
Related Topics
Configuring a Target Temperature
Displaying a Temperature Status Monitor
Description
If a temperature probe is used, records the temperature of
the sample after each measurement. Temperature readings
are stored in the sample properties.
If a Peltier cell holder or changer is used, defines a setpoint
temperature for the cell block and a stir speed if desired.
The available settings depend on the specifications for the
temperature-controlled accessory.
Starts the measurement when the sample (requires a tem-
perature probe) or cell block (requires a Peltier cell holder
or changer) reaches a specified temperature.
If a temperature probe is used, maps probe channels 1
through 8 with up to eight cell changer positions. Useful
only when using an automatic cell changer with multiple
temperature probes.
Deselect this to always record the temperature of probe 1.
Thermo Scientific