Table of Contents
Advertisement
Installing the ED Amperometry Cell
Unpacking and Disassembling the Cell
Thermo Scientific
This appendix provides instructions for installing the ED amperometry cell. Complete these
instructions before plumbing the cell in the system.
.
Contents
Unpacking and Disassembling the Cell
Installing the Working Electrode
Installing the pH-Ag/AgCl Reference Electrode
Installing the PdH Reference Electrode
IMPORTANT Always wear gloves when handling the ED cell. Never touch the electrode
surface.
To unpack and disassemble the cell
1. Remove the ED cell from the box. Refer to
Figure 48. ED cell components
Yoke knob
and block
Tab
Spacer block
Figure 48
Cell outlet
(with fitting plug)
Cell inlet
Titanium cell inlet tubing
Cell body
(remove for use with the
Dionex ICS-4000)
Cell cable
to identify the cell parts.
Dionex ICS-4000 Installation Instructions
A
49
Advertisement
Table of Contents
