Recertification - Thermo Scientific Evolution 200 Series User Manual

12
Calibrated Validation Carousel (CVC)
Routine Maintenance

Recertification

258 Evolution 200 Series User Guide
Very little maintenance is required to keep the accessory in good working condition. The
exterior surface of the accessory should be kept clean and free of spilled chemicals and dust.
Use the provided bulb to remove dust from the exposed surface of the standards.
Always keep the accessory in its case when not in use. Always keep the cover closed. Never
expose the standards to airborne smoke or dust.
Related Topics
Installing the Carousel on the Smart Base Unit
Installing Complete CVC in the Instrument
Loading CVC Calibration Data
Using the CVC
Recertification
We offer a recertification and repair service for the CVC. It is recommended that you return
your accessory for recertification every two years — or whenever you have reason to believe
that it no longer exhibits its certified value. Before returning your accessory, contact technical
support.
Related Topics
Installing the Carousel on the Smart Base Unit
Installing Complete CVC in the Instrument
Loading CVC Calibration Data
Using the CVC
Routine Maintenance
Thermo Scientific