Thermo Scientific Evolution 200 Series User Manual page 387

Thermo Scientific
External Control
• RS-232
• USB
Dimensions
• Width: 216 mm (8.5 in)
• Height: 184 mm (7.25 in)
• Depth: 269 mm (10.6 in)
• Weight: 3 kg (8 lbs)
Electrical Data
• Voltage: 115/120 V or 220/240 V ±10% (factory setting 220/240 V)
• Frequency: 50/60 Hz
• Power: 100 VA
• CE marked
Description of Symbols
CAUTION Symbol identifying the use of substances dangerous for health and the
environment. For these substances, refer to the laws and terms in force for the laboratory
using the instrument. Take the necessary precautions when using flammable or explosive
substances.
Environmental Conditions
Performance and safety of the accessory are guaranteed if operated under the following
conditions:
• Pollution degree 2 (standard CEI EN 61010-1).
• Installation category II with smaller transient over voltages (standard IEC 664).
• Mains voltage fluctuations must not exceed 10% of the nominal voltage.
• Location of use is indoors at an altitude <2000 m (6562 ft).
• Location of use exhibits a relative humidity <80% noncondensing.
• Location of use exhibits an ambient temperature between 10 °C and 35 °C (50 °F and
95 °F).
• Location of use is free from dust and vapors of solvents and acids.
SPE-8W Smart Peltier Linear Cell Changer
Evolution 200 Series User Guide
26
373