Detector Access Panel; Corrosion Protection; Installing Sample Compartment Windows; Purging The Sample Compartment - Thermo Scientific Evolution 200 Series User Manual

3
Evolution 200 Series Spectrophotometers
Spectrophotometer Basics

Detector Access Panel

Corrosion Protection

Installing Sample Compartment Windows

116 Evolution 200 Series User Guide
To remove the panel between the detector and sample compartment, remove the
compartment window and then loosen the thumbscrew.
Thumbscrew Thumbscrew
Window (optional)
Removable panel
To replace the panel, hook the tabs on the bottom edge over the slots in the sample
compartment side wall and tighten the thumbscrew.
Related Topics
Removing and Installing the Detector Module
Detector Access Cover
Installing Sample Compartment Windows
The spectrophotometer contains precise optical components that may be damaged by a
corrosive environment. Before using the instrument to analyze volatile, corrosive or caustic
samples, install the optional
compartment.
Related Topics
Installing Sample Compartment Windows

Purging the Sample Compartment

The optional windows attach to the sample compartment side walls using magnets.
sample compartment windows
sample
and, if necessary, purge the sample
Thermo Scientific